Correct Installation Of Peanut Oil Press Machine
Author：Admin Views： Modified date：2018/06/10
Correct installation of peanut oil press
Before installation, we should thoroughly clean up the newly purchased peanut press. The main shaft is removed, the upper pressing basket is removed, and the outer surface, inner surface and screw feeder of the screw are polished and polished with abrasive cloth. Lubricating grease is added to all lubrication parts. The varieties and grades of lubricants added in gear boxes should meet the requirements of the instructions. When the rows are polished and polished, they must be arranged according to their original position and can not be misplaced, because the arrangement and position of the rows are very important to the performance of the oil press. The compacting nut is pressed tightly after the circular row loader, and the degree of compaction can be creeping by the disc when it is pressed. After the above treatment, the oil press can be fixed on the foundation with anchor bolts. When installing, the belt pulley of the motor should be aligned with the belt pulley of the oil press, the position is moderate, the rotation direction is correct, and the tightness of the transmission belt should be adjusted properly.
The use of peanut oil press
Before using the oil press, all the devices and containers should be prepared first, and the tightness of the transmission belt should be checked and adjusted. Then start the motor, make the machine turn around 15min, check the speed of the screw shaft. The general speed should be around 33dmin. When idling, attention should be paid to the meshing of gear inside the gear box and whether the sound is normal, and whether the bearing parts and motors are normal. When the press is idle, the motor current should be about 3A. If the current is too high, stop checking immediately, then switch on again after adjustment.
Previous : How Much Peanut Oil Can Be Squeezed Out By The Peanut Oil Press
Next : Price difference factors of oil press machine