How to increase hot cold oil press machine's oil yield_Gongyi Jintai Trading Co., Ltd

News

How to increase hot cold oil press machine's oil yield

Author:Admin Views: Modified date:2016/03/28

How to increase hot cold oil press machines oil yield

After I plant hot & cold cold press oil machine hot & cold cold press oil machine long-term study found that small oil operating temperature, the oil should be based on variety and extent of the wet and dry. If the material is dry, the machine will have a higher temperature, and vice versa can be lower. General machine at a temperature of 60 ℃ C to an oil. Touch body shell feel can be put into normal operation when hot; the moisture content of the fuel before pressing should be appropriate, the best moisture content as follows: Peanut 8% -11%, 5% -8% of soybean, cottonseed 4% -6 %, 6% -8% rapeseed; when pressed to open slowly when adjusting cake thick cake thickness adjusted to 0.3 to 1.0 mm, considered to meet the requirements, then you can flip a lever to adjust the lock nut, and increase the volume of feed; equipment constantly at work clearing slag leakage, to prevent passage is blocked.
Small cold hot oil press machine in operation, processing only to master certain skills in order to improve oil extraction rate.
1, The hot cold oil press machine temperature should be maintained at 15 ℃ -20 ℃, the temperature is too low will affect oil yield and oil quality.
2, the moisture content of the fuel before pressing should be appropriate, the best moisture content as follows: 8% -11% peanuts, soybeans 5% -8%, 4% -6% cottonseed, rapeseed 6% -8%.
3, empty the machine is operating normally, even a small amount of oil slowly fed to the machine honing heat, observe whether the cake smoothly. If you can not be discharged smoothly, it may be a cake mouth gap is too small, then adjust the hand wheel clockwise. I found a cake too much too fast, then counter-clockwise to adjust the hand wheel until the normal operation so far. Then slowly increase the feed rate, to prevent uneven charging, load suddenly rises, causing blockage.
4, press the operating temperature. If the material is dry, the machine will have a higher temperature, and vice versa can be lower. General machine greenhouse at 60 ℃ to oil. Touch body shell feel can be put into normal operation when hot.
5,When open the hot cold oil press machine,it  should be pressed to be adjust thick cake, cake thickness adjusted to 0.3 mm -1.0 mm, considered to meet the requirements, then you can flip a lever to adjust the lock nut, and increase the volume of feed.
6, A small hot cold oil press machine work constantly remove slag leakage, to prevent passage is blocked. The recovered oil residue can continue to squeeze back into the hopper. When pressed a second time, the cake should be broken into small pieces after about 10 mm feed hopper.
7, After the hot cold oil press machine work for 3 months to 4 months, once maintenance. Regularly with all parts of butter or oil lubrication.
 

Previous : Flax cold press oil machine very popular in the world Next : What is the main feature of a groundnut screw cold press oil machine?

About us | News | Products | XML
©Jintai Trading Co., Ltd All Rights Reserved.