News

Small oil press machine techniques introduction

Author:Admin Views: Modified date:2016/03/22

Many customers do not know how to select the small oil press machine when they buy them? To solve this problem,Gongyi Jintai give you a detail introduction of small oil press machine techniques:
一、small type oil press machine technical parameter:

Type 6YL-60 6YL-70 6YL-80 6YL-100 6YL-120 6YL-150

Screw diameter  (mm)

 55 65 80 100 120 150

Screw speed (r/min)

 52 48 63 43 36 33-42

Power (main frame) (KW)

 2.2 3 5.5 7.5 11 15

Vacuum power (KW)

 0.55 0.75 0.55 0.75 0.75 4

Heater (KW)

 0.9  1.8  3 3.5 4 4.5

Handling capacity (kg/h)

 30-60  50-80 80-150 150-250 250-350 300-450

Weight (kg)

 220 280 500 850 1300 1950
Size (mm)  1200x780x1100 1400x860x1260 1650x1500x1700 1700x1600x1750 1800x1700x1750 2380x1850x2000

Through the above table we can realize that: according to every handing capacity of (raw material capacity) each small oil press machinery, you can select different model oil extruction. For a small workshop,  6YL-80 type, 6YL-100 type  already can meet their daily needs. A set of equipment investment in the USD2500-3000 million or less, I believe that the average investor can afford.
   Many people also don't the every raw material 's oil output yield of our oil extraction, now I can also give you our techniques:
二、Raw material oil yield techniques

Material
Oil press rate(%) Cookie thickness(mm) residual oil rate(%)
Sesame 42-55 1.0-1.5 <=7
Peanut 40-50 0.8-2.0 <=8
Rapeseed 28-38 1.0-1.5 <=8
Oil sunflower 28-35 1.2-1.5 <=8
Soybean 10-16 0.8-1.5 <=7
Flax 33-40 0.8-1.5 <=7
Cotton seed 11-25 1.0-2.0 <=6
walnut 42-52 0.8-1.5 <=6
Camellia seed 26-38 1.0-2.0 <=6

Through the above table we can see that : in all the raw materials, peanut oil yield the highest, followed by sesame seeds and walnuts. When you purchase raw materials, you'd better see the local people like to eat which kind of oil, you can according to your survey to determine the number of purchased raw materials.
Third, The preparatory work before the small oil press machine start work:
  1, Check work before start the small oil press machine: first of all ,add a little hydraulic oil to make sure the small oil tank cleaned before the operation. The operator need carefully check whether the bolts loosers or not between the various components of the case, and make sure the line is connected correctly. If they are abnormal, promptly corrected, in order to avoid unnecessary trouble.
  2, A good warm up preparation for the small oil press machine. In general, the following preheating temperature spring and summer, usually between 50-70 degrees, the temperature usually in the fall and winter preheating is 70-90 degree, such as preheating temperature control is not good for the oil yield, production efficiency has a great influence. Empty machine running time: spring and winter, because the hydraulic oil relatively dense, its air time is usually 5-10 minutes. Other seasons, it only needs to run 1-2 minutes.
Fourth, the small oil press machine installation considerations:
1, Automatic oil installation, surrounded to leave enough space for the operator to use;
2, Stable oil extraction equipment, machine first four anchor bolts under the seat is adjusted so that the device is in a horizontal position, and then filter drums to adjust the level of the state;
3. After the device is installed in the device from the range of 3-5 m, the operator can move back and forth, to operate the equipment.
   I hope you understand the contents of the small oil press machine and it can be useful for your daily work.

Previous : Do investing oil extraction machine price available? Next : [News]

About us | News | Products | XML
©Jintai Trading Co., Ltd All Rights Reserved.