"Jintai" brand sunflower oil mill plant is controlled by the main electrical appliances, automatic heating, adjust the transmission and vacuum oil filter and other components. Pressing bolts alloy steel carburized enhance the surface hardness and wear resistance; row by pressing surface grinder grinding, oil lines to ensure accuracy, improve the oil yield; distribution, vacuum, automatic heating and other standard components, the choice of well-known brand, optimize the machine configuration; sunflower oil mill plant made of stainless steel and chrome-plated surface treatment, in line with food hygiene standards.
Drawbacks of conventional sunflower oil mill plant method: poorly equipped, heavy operation, large area, high energy consumption, the oil is low, and poor sanitation.
Many customers in the purchase of sunflower oil mill plant, and are very concerned about a problem that the life of sunflower oil mill plant equipment length. Of course, we all hope it's life as long as possible, but the actual situation is not like most of the time. Why is this? Because we use the time, and not so great attention to detail, resulting in our sunflower oil mill plant small problems continue, the situation is not a big problem. Today, small series will introduce how to make the life of sunflower oil mill plant equipment longer.
First of all, every morning, we started to work, do not start the machine directly, but see our sunflower oil mill plant lubrication condition to see if you need to add oil.
Secondly, gear box, we need to check whether the gearbox in oil, and if the lack of oil, we need to replenish. In addition, we have to regularly check the gearbox oil. We know that if the oil into the dirt or impurities, and will affect its work, so if these phenomena, we have timely replacement of oil.
Then, we need to periodically check the wear and tear parts of the case of sunflower oil mill plant. If you find a serious loss of parts, we need to be replaced immediately.
Finally, screw sunflower oil mill plant after the work is completed, we need to clean up the machine residual impurities, to keep clean the machine.
Special attention is needed, we will sometimes work continuously for a long time, then our sunflower oil mill plant pressing screw portion of the temperature will continue to rise, the continuous high temperature of the machine is not good, so we need to take measures machine to cool down, thereby increase sunflower oil mill plant using life.